Skip to main content

Suche

Search Results

97 results:
170124_EN_Datenblatt_3-pc_syringes.pdf  
Injection Management 3 - PIECE SYRINGES Also included in our portfolio are Vogt Medical 3-piece Syringes. These syringes are often designed for special indications and provide safety for the user as well as the patient. Trust at its highest level! VM® 3-piece Syringes Description: › 3-piece Syringes are used for injecting medications using standard and specialised techniques › The transparent barrel ensures the controlled administration of the medication › Smooth-glide plunger ensures painless injection with no jerking › Latex-free plunger seal reduces the risk of allergic reactions › Clearly legible graduation for safe, reliable dosage › Secure plunger stop prevents loss of medication › Broad range of needle fittings (Luer Slip, Luer Lock) provides a range of choices, depending on the indication Medical grade materials (safety tested): › Syringes: − Barrel, plunger – polypropylene − Plunger seal – medical grade rubber − Lubricant – silicone oil › Needles: − Hub and protective cap - polypropylene − High quality steel with high chrome-nickel content, manufactured in compliance with AISI standards − Needle/hub bonding – epoxy resin – Lubricant – silicone oil Packaging: › Blister/box/carton Quality: › Conforms to ISO 7886, ISO 7864 standards Sterilisation: › Ethylene oxide Shelf life: › 5 years 13 VOGT MEDICAL VM® 3-piece Syringes Catalog No. Volume ml Taper Type Injection needle Outer diameter Gauge mm without without without without without without without without without without without without side side side side side side side side side side side side side side side Length in Colour code mm Quantity box/carton 1310237 1310239 1310240 1310244 1310248 1310250 1310263 1310253 1310254 1310255 1310256 1310257 1310349 1310259 1310261 1410262 1410266 1310262 1310266 1310270 1310275 1310277 1310278 1310279 1310280 1310225 1310228 1 2 (2,5) 3 5 (6,0) 10 (12) 20 (22) 30 2 (2,5) 3 5 (6,0) 10 (12) 20 (22) 1 2 (2,5) 3 5 (6,0) 10 (12) 5 (6,0) 10 (12) 20 (22) 2 (2,5) 3 5 (6,0) 10 (12) 20 (22) 5 5 Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Luer Slip Luer Slip concentric concentric concentric eccentric eccentric eccentric eccentric concentric concentric concentric concentric concentric concentric concentric concentric concentric concentric eccentric eccentric eccentric concentric concentric concentric concentric concentric eccentric eccentric 27G 23G 23G 22G 21G 22G 21G 21G 23G 23G 22G 21G 21G 22G 21G 0,4 0,6 0,6 0,7 0,8 0,7 0,8 0,8 0,6 0,6 0,7 0,8 0,8 0,7 0,8 ½ 1¼ 1¼ 1½ 1½ 1½ 1½ 1½ 1¼ 1¼ 1½ 1½ 1½ 1¼ 1½ 13 30 30 40 40 40 40 40 30 30 40 40 40 30 40 grey dark-blue dark-blue black dark-green black dark-green dark-green dark-blue dark-blue black dark-green dark-green black dark-green 100/3200 100/3000 100/3000 100/2400 100/1600 50/800 640/2300 100/3000 100/3000 100/2400 100/1600 50/800 100/3200 100/3000 100/3000 100/2400 100/1600 100/2400 100/1600 50/800 100/3000 100/3000 100/2400 100/1600 50/800 100/2400 100/2400 VOGT MEDICAL 14 VM® 3-piece Syringes with mounted needle Catalog No. Volume Taper ml Type Injection needle Outer diameter Gauge mm mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted 22G 22G 21G 21G 27G 23G 23G 21G 23G 22G 21G 21G 23G 23G 22G 21G 0,7 0,7 0,8 0,8 0,4 0,6 0,6 0,8 0,6 0,7 0,8 0,8 0,6 0,6 0,7 0,8 Length in mm 1¼ 1¼ 1½ 1½ ½ 1¼ 1 1½ 1¼ 1½ 1½ 1½ 1¼ 1¼ 1½ 1½ 30 30 40 40 13 30 25 40 30 40 40 40 30 30 40 40 Colour code Quantity box/carton 1310144 1310147 1310150 1310159 1310286 1310287 1310500 1310260 1310288 1310289 1310504 1310290 1310297 1310298 1310299 1310300 2 (2,5) 5 (6,0) 10 (12) 20 (22) 1 2 2 (2,5) 2 (2,5) 3 5 (6,0) 5 (6,0) 10 (12) 2 (2,5) 3 5 (6,0) 10 (12) Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Lock Luer Lock Luer Lock Luer Lock concentric concentric concentric eccentric concentric concentric concentric concentric concentric eccentric eccentric eccentric concentric concentric concentric concentric black black dark-green dark-green grey dark-blue dark-blue dark-green dark-blue black dark-green dark-green dark-blue dark-blue black dark-green 100/2400 100/1800 100/1200 100/800 100/3200 100/2400 10/500 100/2400 100/2400 100/1800 50/500 100/1200 100/2400 100/2400 100/1800 100/1200 15 VOGT MEDICAL VM® 3-piece Syringes PREMIUM Catalog No. Volume Taper ml Type Injection needle Outer diameter Gauge mm mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted mounted 30G 26G 23G 23G 22G 23G 22G 23G 22G 21G 22G 21G 21G 0,3 0,45 0,6 0,6 0,7 0,6 0,7 0,6 0,7 0,8 0,7 0,8 0,8 Length in mm ½ ⅜ 1 1¼ 1½ 1¼ 1½ 1¼ 1½ 1½ 1½ 1½ 1½ 13 10 25 30 40 30 40 30 40 40 40 40 40 Colour code Quantity box/carton 1310565 1310566 1310567 1310568 1310569 1310570 1310571 1310572 1310573 1310574 1310575 1310576 1310577 1 1 2 (2,5) 2 (2,5) 2 (2,5) 3 3 5 (6) 5 (6) 5 (6) 10 (12) 10 (12) 20 (22) Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip concentric concentric concentric concentric concentric concentric concentric eccentric eccentric eccentric eccentric eccentric eccentric dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue dark-blue 100/3200 100/3000 100/3000 100/2400 100/1600 50/800 640/2300 100/3000 100/3000 100/2400 100/1600 50/800 100/3200 All VM® 3-piece Syringes PREMIUM are latex free VOGT MEDICAL 16  
170124_EN_Datenblatt_Extension_sets.pdf  
TECHNICAL DATASHEET › Infusion & transfusion management VM® EXTENSION SETS WITH STOPCOCK Intended Use: Are intended for safe and convenient carrying out of infusion therapy from one or two different sources simultaneously. Key Benefits Extension sets are characterized by a low filling volume, which makes it possible to introduce small infusion volumes without any losses. Absolutely transparent tubes - allow to control the quality of infusion. 3-way stopcock allow to reduce the number of additional manipulations with sharp objects. EN TECHNICAL DATASHEET VM® EXTENSION SETS HP WITH 3-WAY STOPCOCK PVCFREE PRODUCT MATERIALS Components 1 2 3 4 5 6 Cap Luer lock Tubing Female luer lock 3-way stopcock Female luer cap Raw Materials PE PC TPE PC PC/ABS PE QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS HP WITH 3-WAY STOPCOCK PRODUCT MATERIALS Components 1 2 3 4 3-way stopcock Tubing Rotary luer lock Screw cap Raw Materials PC/PE/ABS PVC ABS ABS TECHNICAL DETAILS Tubing diameter Rotary luer lock Screw cap 2,7 x 4,0 mm transparent blue QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS HP WITH 3-WAY STOPCOCK DEHP-FREE PRODUCT MATERIALS Components 1 2 3 4 3-way stopcock Tubing Rotary luer lock Screw cap Raw Materials PC/PE/ABS PVC/DEHP-free ABS ABS TECHNICAL DETAILS Tubing diameter Rotary luer lock Screw cap 2,8 x 4,0 mm transparent blue QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET TYPES WITH SIZES VM® STOPCOCKS WITH EXTENSION SET Art. No. Type Characteristic Material Filling volume Pressure limit bar 1311505 1311506 1311507 1311508 1311509 1311510 1311590 with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor PVC/PC PVC/PC PVC/PC PVC/PC PVC/PC PVC/PC PVC 0,57 0,57 1,15 2,25 3,3 4,35 3 3 3 3 3 3 3 3 Extensor Tubing dimensions mm x mm 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1.5 x 2,7 blue white blue blue blue blue blue Colour code Packaging cm 10 10 25 50 75 100 150 PCS/carton 40/1000 40/1000 40/1000 40/1000 40/800 40/800 30/300 VM® STOPCOCKS WITH EXTENSION SET OF SMALL FILLING VOLUME (part 1) Art. No. Type Characteristic Material Filling volume Pressure limit bar 1311511 1311512 1311588 1311589 1311591 1311580 1311581 with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor PC/ PVC, DEHP free PC/ PVC, DEHP free PC/PE PC/PE PC/ PVC, DEHP free PVC/PC PVC/PC 0,35 0,35 0,7 3 3 3 0,45 0,7 3 3 Extensor Tubing dimensions mm x mm 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 blue blue blue blue blue blue blue Colour code Packaging cm 15 30 150 150 10 10 25 PCS/carton 40/1000 40/1000 30/600 30/600 40/1000 40/1000 40/1000 approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® STOPCOCKS WITH EXTENSION SET OF SMALL FILLING VOLUME (part 2) Art. No. Type Characteristic Material Filling volume Pressure limit bar 1311582 1311583 1311584 1311585 1311586 1311587 with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock with 3-way stopcock lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor lipid resistant with extensor PVC/PC PVC/PC PC/ PVC, DEHP free PC/ PVC, DEHP free PC/ PVC, DEHP free PC/ PVC, DEHP free 1 1,5 0,35 0,7 1 1,5 3 3 3 3 3 3 Extensor Tubing dimensions mm x mm 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 blue blue blue blue blue blue Colour code Packaging cm 50 80 10 25 50 80 PCS/carton 40/1000 40/1000 40/1000 40/800 40/800 40/800 TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET › Infusion & transfusion management VM® EXTENSION SETS HP Intended Use: With the extension sets the distance between the patient and the infusion is more flexible. The tubes are available in various lengths and materials. They are buckling resistant and guarantee a safe connection. Key Benefits › Extension sets are available high-pressure resistance designed for infusion pumps. › The extension tubing prevents dislodgement of the catheter. › It can be used to add length to existing tubing. › The PE extension tubing for application aggressive, reactive drug e.g. EN TECHNICAL DATASHEET VM® EXTENSION SETS HP PRODUCT MATERIALS Components 1 2 3 4 5 Luer cap Luer lock Tubing Female luer lock Screw cap Raw Materials PE/PP ABS PVC PC ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS HP WITH PU + NYLON MATERIALS PRODUCT MATERIALS Components 1 2 3 Spin connector Tubing Female luer lock Raw Materials ABS PU+Nylon PC QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET TYPES WITH SIZES VM® EXTENSION SET, HP Art. No. Type Material Filling volume 2,84 0,2 0,21 0,63 1 1,5 2 3 4 5 Pressure limit bar 24,2 24,2 34,3 34,3 34,3 34,3 34,3 34,3 34,3 34,3 Extensor cm 150 10 10 30 50 75 100 150 200 250 Tubing dimensions mm x mm 1.5 x 2,7 1.5 x 2,7 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 1,8 x 3.65 Packaging PCS/carton 30/600 40/800 40/800 40/800 40/800 40/800 30/600 25/500 25/500 25/500 1311550 1311551 1311552 1311553 1311554 1311555 1311556 1311557 1311558 1311559 with with with with with with with with with with male male male male male male male male male male and and and and and and and and and and female female female female female female female female female female luer luer luer luer luer luer luer luer luer luer lock, lock, lock, lock, lock, lock, lock, lock, lock, lock, HP HP HP HP HP HP HP HP HP HP PVC PVC PU+nylon PU+nylon PU+nylon PU+nylon PU+nylon PU+nylon PU+nylon PU+nylon approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET › Infusion & transfusion management VM® EXTENSION SETS LP Intended Use: With the extension sets the distance between the patient and the infusion is more flexible. The tubes are available in various lengths and materials. They are buckling resistant and guarantee a safe connection. Key Benefits › Extension sets are available with low pressure resistance designed for infusion bags. › The extension tubing prevents dislodgement of the catheter. › It can be used to add length to existing tubing. › The PE extension tubing for application aggressive, reactive drug e.g. EN TECHNICAL DATASHEET VM® EXTENSION SETS LP PRODUCT MATERIALS Components 1 2 3 4 5 Luer cap Luer lock Tubing Female luer lock Screw cap Raw Materials PE/PP ABS PVC/DEHP-free ABS/PC ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS LP WITH ONE SLIDE CLAMP PRODUCT MATERIALS Components 1 2 3 4 5 Luer cap Rotary or fixed luer lock Tubing Slide clamp or Robert clamp Female luer lock Raw Materials PP ABS PVC/PVC-free PE/POM ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS LP WITH TWO SLIDE CLAMPS PRODUCT MATERIALS Components 1 2 3 4 5 6 7 Luer cap Rotary or fixed luer lock Tubing 3 way connector Slide clamp Female luer lock Female luer cap Raw Materials PP ABS PVC/PVC-free ABS PE PC ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS LP WITH THREE SLIDE CLAMPS PRODUCT MATERIALS Components 1 2 3 4 5 6 7 Luer cap Rotary or fixed luer lock Tubing 3 way connector Slide clamp Female luer lock Female luer cap Raw Materials PP ABS PVC/PVC-free ABS PE PC ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS LP WITH FOUR SLIDE CLAMPS PRODUCT MATERIALS Components 1 2 3 4 5 6 7 Luer cap Rotary or fixed luer lock Tubing 3 way connector Slide clamp Female luer lock Female luer cap Raw Materials PP ABS PVC/PVC-free ABS PE PC ABS QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SETS LP WITH NEEDLELESS INJECTION PORT PRODUCT MATERIALS Components 1 2 3 4 5 6 Luer cap Rotary or fixed luer lock Slide clamp Tubing Female luer lock Needleless connector Raw Materials PE/PP ABS PE PVC PC PC+Silicone QUALITY AND SAFETY Norms ISO 594-1,2 STERILIZATION Method Shelf life Ethylene oxide 5 years ISO 8536-4 ISO 10993-1 Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: Quantity per carton: pieces TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® EXTENSION SET, LP Art. No. Type Characteristic Material Filling volume Pressure limit bar 1311519 1311520 1311521 1311522 1311523 1311524 1311525 1311526 1311527 1311528 1311529 1311530 1311531 1311532 1311533 1311534 1311535 1311536 1311537 1311538 1311539 with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP PVC PVC PVC PVC PVC PVC PVC PVC PVC PE PVC PVC PE PE PE light proof PVC PE PE light proof yellow PVC PE PVC 4,25 1 3,4 1 2,55 1 1,3 1,7 1 1 0,2 0,6 1 1,5 2 3 4 6,4 0,51 3 3 3 3 3 3 3 3 3 Tubing length cm 10 30 50 75 100 150 200 320 30 50 75 100 100 150 150 150 200 200 200 250 250 Tubing dimensions mm x mm 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 1,0 x 2,0 30/600 30/600 40/800 30/600 Packaging PCS/carton 40/800 40/800 40/800 40/800 30/600 30/600 25/500 25/500 40/800 TECHNICAL DATASHEET VM® EXTENSION SET, LP Art. No. Type Characteristic Material Filling volume ml 1311540 1311541 1311542 1311543 1311544 1311545 1311546 1311547 1311548 1311549 1311610 1311611 1311615 1311616 1311625 1311626 1311650 1311651 1311592 1311593 with male and female luer lock, LP with male and female luer lock, LP with male and female luer lock, LP with male and 2 female luer lock, LP with male and 2 female luer lock, LP with male and 3 female luer lock, LP with male and 3 female luer lock, LP with male and 4 female luer lock, LP with male and 4 female luer lock, LP with needless injection port, LP Tube, fixed luer lock, LP Extension Tube, 1000mm tubing, fixed luer lock Tube, 1500mm tubing, fixed luer lock Tube, 1500mm tubing, fixed luer lock Tube, 250mm tubing, fixed luer lock Tube, 250mm tubing, fixed luer lock Tube, 500mm tubing, fixed luer lock Tube, fixed luer lock with needless injection port with needless injection port with small ABS cap with small ABS cap with small ABS cap with small ABS cap with small ABS cap with small ABS cap with small ABS cap with small ABS cap slide clamp slide clamp 2 slide clamp 2 slide clamp 3 slide clamp 3 slide clamp 4 slide clamp 4 slide clamp PVC PVC PVC, DEHP free PVC PVC, DEHP free PVC PVC, DEHP free PVC PVC, DEHP free PVC, DEHP free PVC PVC, DEHP free PVC PVC, DEHP free PVC PVC, DEHP free PVC PVC, DEHP free PVC, DEHP free PVC, DEHP free 2 2 2 3 3 0,5 0,5 1 1 0,17 0,34 1 3 3 3 3 3 3 3 3 1 1 0,4 1 0,3 1 5,1 0,3 0,255 Pressure limit bar 1 3 1 Tubing length cm 300 15 15 7,5 x 7,5 /p 7,5 x 7,5 /p 7,5 x 7,5 /p 7,5 x 7,5 /p 7,5 x 7,5 /p 7,5 x 7,5 /p 120 100 100 150 150 25 25 50 50 15 30 Tubing dimensions mm x mm 1,0 x 2,0 1.5 x 2.7 1,0 x 2,0 1,7 x 3,2 1,0 x 2,0 1,7 x 3,2 1,0 x 2,0 1,7 x 3,2 1,0 x 2,0 1,0 x 2,0 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,5 x 2,7 1,0 x 2,0 1,0 x 2,0 30/600 30/600 30/600 30/600 30/600 40/800 40/800 40/800 40/800 40/800 40/800 30/600 30/600 40/800 Packaging PCS/carton TD Sheet: Rev. 1 created on: January 17th 2017 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018  
170124_EN_Datenblatt_Stopcocks.pdf  
TECHNICAL DATASHEET › Infusion & Transfusion Management VM® MANIFOLDS Intended Use: Manifolds are used to bring multiple samples together in a simple, repeatable and reliable manner. Key Benefits › Manifolds are designed to effectively manage patients fluid levels, contrast media, and prevent waste in diagnostic and interventional procedures › They are available in two- or three-port configurations of which more than one connection can be used › Easy-grip handles and clear polycarbonate bodies for visibility with leak free, smooth turning low torque bandles › Sterile and pyrogen-free for single use TECHNICAL DATASHEET VM® MANIFOLDS PRODUCT MATERIALS Components 1 2 3 Spin connector Switch Multicentre value Raw Materials PC POM PC QUALITY AND SAFETY Norms ISO 594-1 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification IIa STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Individually wrapped TD Sheet: Rev. 1 created on: November 11th 2016 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® MANIFOLDS Art. No. Type Characteristic Extensor cm Filling volume ml Material Limit pressure bar Size tubing mm 1311513 1311514 1311515 with 2 stopcocks with 3 stopcocks with 4 stopcocks lipid resistant lipid resistant lipid resistant 0,35 0,7 1,05 PC PC PC 34,3 34,3 34,3 blue blue blue 25/200 25/200 25/200 Colour code Packaging psc/carton VM® MANIFOLDS WITH EXTENSION SET Art. No. Type Characteristic Extensor cm Filling volume ml Material Limit pressure bar Size tubing mm 1311516 1311517 1311518 with 2 stopcocks with extensor with 3 stopcocks with extensor with 4 stopcocks with extensor PVC PVC PVC 150 150 150 2,55 2,9 3,25 PC PC PC 34,3 34,3 34,3 1,7 x 3,2 1,7 x 3,2 1,7 x 3,2 blue blue blue 10/200 10/200 10/200 Colour code Packaging psc/carton approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET › Infusion & transfusion management VM® STOPCOCKS Intended Use: Sterile 3-way stopcock is intended for carrying out infusion therapy from one or two different sources simultaneously. They allow you to switch the direction of the flow, if necessary, interrupt the infusion at the right time, inject medications without a needle, and also take blood. Key Benefits Allow to reduce the number of additional manipulations with sharp objects Provide convenience and safety of infusion therapy. It can be used for gravitational infusion and infusion under pressure. Resistant to the destructive effect of fatty emulsions (lipid resistant) Mobility in axial and radial directions by 360° Indicators of open channels (arrows) (except for type OFF) 3 connections Luer Lock - 2 channels - external thread, one channel - internal thread The flow regulators are color coded (blue - vein, red - artery, white - universal, yellow - pulmonary vein) TECHNICAL DATASHEET VM® 3-WAY STOPCOCK PRODUCT MATERIALS Components 1 2 3 4 Screw cap Stopcock body Stopcock tap Spine connector Raw Materials ABS PC PE PC TECHNICAL DETAILS Flow rate Leak proof Air pressure Hydraulic pressure 500ml/min+/-10% up to 3 bars 0,6bar/15s 4,5bar/30min QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification Is STORAGE Temperature Humidity between +0°C and +40°C less than 80% PACKAGING Unitary Individually wrapped TD Sheet: Rev. 1 created on: November 15th 2016 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET VM® 3-WAY STOPCOCK HP PRODUCT MATERIALS Components 1 2 3 4 5 Luer cap Spine connector Stopcock tap Stopcock body Female luer cap Raw Materials ABS PC PE PC ABS TECHNICAL DETAILS Flow rate Leak proof 500ml/min+/-10%. up to 500 psi (red) up to 1200 psi (blue) QUALITY AND SAFETY Norms ISO 594-1, 2 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification Is PACKAGING STORAGE Unitary Temperature Humidity between +0°C and +40°C less than 80% Individually wrapped TD Sheet: Rev. 1 created on: November 15th 2016 by: Natalie Zavarko approved by: Liudmyla Honchar on: April 2018 TECHNICAL DATASHEET TYPES WITH SIZES VM® STOPCOCKS Art. No. Type Characteristic Pressure limit bar 1311500 1311501 1311502 1311503 1311504 1311560 3-way 3-way 3-way 3-way, OFF 3-way, OFF 3-way high pressure high pressure lipid resistant 3 3 3 34,3 82,6 3 blue red white blue red blue Colour code DEHP-free Filling volume ml 0,16 0,16 0,16 0,3 0,3 0,16 100/1600 100/1600 100/1600 50/1000 50/1000 100/1600 Packaging approved by: Liudmyla Honchar on: April 2018  
170124_EN_Datenblatt_Catheter_Foley.pdf  
Urology Products CATHETER FOLEY The Vogt Medical Catheter Foley is designed to meet the demands of the patient. It comes in individual sizes and different materials, so it is comfortable to wear. The change from a 3- to a 2-way catheter can be done easily without having to change providers. This means the patient does not need to forgo using a catheter that is comfortable to wear. The Catheter Foley is also available in small sizes for paediatrics. VM® Catheter Foley Description: › VM ® Catheter Foleys are used for long-term urinary drainage › Transparent, symmetrical balloon (volume 3 ml, 3 - 5 ml, 5 - 10 ml or 30 ml) guarantees maximum protection during use › Two large, lateral eyes ensure optimal urinary flow › VM ® Catheter Foleys are manufactured either from silicone-coated latex or 100% silicone › Wide product range permits selection in accordance with the indication › The product range includes 2-way and 3-way catheters › The sizes 6 - 10 Fr are used for children, while the sizes 12 - 26 Fr are used for adults › Latex catheters are very flexible, which means maximum comfort for patients › Silicone coating prevents irritation of the urethra and reduces the risk of an allergic reaction › The colour code on the connector and the fill level volume indicator for the catheter balloon guarantee additional convenience Medical grade materials (safety tested): › Latex with silicone coating › 100% silicone Packaging: › Polybag/polybag/carton Quality: › Conforms to EN 1616 standard Sterilisation: › Ethylene oxide Shelf life: › 5 years VM® Catheter Foley Catalog No. Material Way Size CH/FR 6 8 10 12 14 16 18 20 22 24 26 12 14 16 18 20 22 24 26 16 18 20 22 24 26 6 8 10 12 16 18 20 22 24 26 14 16 18 20 22 24 26 16 18 20 22 24 26 Length mm 280 280 280 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 280 280 280 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 400 Max. volume baloon Quantity box/carton ml 3 3-5 3-5 5-10 5-10 5-10 5-10 5-10 5-10 5-10 5-10 30 30 30 30 30 30 30 30 30 30 30 30 30 30 3 3-5 3-5 5-10 5-10 5-10 5-10 5-10 5-10 5-10 5-10 30 30 30 30 30 30 30 30 30 30 30 30 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 10/500 1316200* 1316201* 1316202* 1316203 1316204 1316205 1316206 1316207 1316208 1316209 1316210 1316211 1316212 1316213 1316214 1316215 1316216 1316217 1316218 1316238 1316239 1316240 1316241 1316242 1316243 1316219* 1316220* 1316221* 1316222 1316224 1316225 1316226 1316227 1316228 1316229 1316231 1316232 1316233 1316234 1316235 1316236 1316237 1316244 1316245 1316246 1316247 1316248 1316249 latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated latex silicone coated 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 100% silicone 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2 3 3 3 3 3 3 *Pediatric; reinforced with nylon wire Vogt Medical Vertrieb GmbH Karlsruhe, Germany www.vogt-medical.com  
170124_EN_Datenblatt_Infusion_sets.pdf  
Infusion & Transfusion Management INFUSION SETS Vogt Medical Infusion Sets are available in various designs (metal spike, plastic spike). They have the highest safety standards, such as bacterial filters and a 15 micron filter, which guarantees a high flow rate while eliminating any existing particles thereby allowing a reliable supply of infusion solutions at all times. VM® Infusion sets Description: › Infusion sets are used for intravenous gravity infusions › Different versions of infusion sets (plastic spike or combined metal spike) facilitate puncturing rubber stoppers on infusion bags and bottles › The vent is equipped with a fluid filter and a convenient lid to reduce the risk of contamination › Transparent drip chamber with dropper enables controlled administration of medication − Standard: calibrated to 20 drops = 1 ml ± 0,1 ml − Micro: calibrated to 60 drops = 1 ml ± 0,1 ml › Large roller clamp ensures easy operation and a precise flow rate › Flow regulator is used for a more accurate regulation of the flow rate › Fluid filter (pore size: 15 μm) ensures a high flow rate and reliable solution filtration › Transparent elastic infusion tubes are unbreakable and allow monitoring of the state of the infused solution › Luer Slip or Luer Lock hub is suitable with injection needles, intravenous catheters and central venous catheters › Triple bevelled injection needle guarantees painless venepuncture (infusion set can be supplied with or without needle on request) Medical grade materials (safety tested): › Injection port – medical grade plastic or metal › Drip chamber – medical grade PVC/ thermoplastic elastomers › Membrane filter – polypropylene Tubes – medical grade PVC/polyurethane › Flow regulator – medical grade polyethylene or ABS plastic › Needle – high carbon chromium-nickel steel › Components do not contain latex Packaging: › Blister/box/carton or polybag Quality: › Conforms to ISO 8536-4 standard Sterilisation: › Ethylene oxide Shelf life: › 5 years 31 VOGT MEDICAL VM® Infusion Sets Catalog No. Spike Drip Flow reguchamber lator Size Type S S S S S, micro S S M M M M S M M M M roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp Taper Size M M M M M M M L L L L M L L L L Luer Slip Luer Slip Luer Slip Luer Lock Luer Lock Luer Lock Luer Slip Luer Slip Luer Lock Luer Slip Luer Lock Luer Slip Luer Lock Luer Lock Luer Lock Luer Lock Tubing Injection Injection needle site cm Type 150 150 150 150 150 150 150 150 150 150 150 300 150 150 150 150 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Packaging Quantity sec. package/carton 1311100 1311102 1311104 1311105 1311107 1311109 1311112 1311139* 1311140* 1311141* 1311142* 1311153 1311155* 1311156* 1311157* 1311700** plastic ABS combined metal combined metal plastic ABS plastic ABS plastic ABS combined metal plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS ● ● ● y-site y-site polybag polybag blister polybag polybag polybag polybag polybag polybag polybag polybag polybag blister blister blister blister 50/500 50/500 25/300 50/500 50/500 50/500 50/500 50/500 50/500 50/500 50/500 50/500 50/300 50/300 50/300 15/300 * with tube fixation option **with integrated 3-way stopcock VM® Enteral Nutrition Infusion Sets Catalog No. Spike Drip Flow reguchamber lator Size Type roller clamp Taper Size M tapered plug Tubing Injection Injection Type needle site cm 150 ● needleless y-shaped Packaging Quantity sec. package/carton 1311353 plastic ABS M blister 50/300 VM® Infusion Sets with Burette CataNo. 1411120 1411121 1411122 1411150 1411151 1411152 Spike Burette Clamp chamber (ml) type 120 120 120 150 150 150 pinch pinch pinch pinch pinch pinch Drops Taper Tubing Injection cm site 150 150 150 150 150 150 Type Material Quantity per carton 50 50 50 60 60 60 plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS micro micro micro micro micro micro Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock ● needleless y-shaped DEHP-free DEHP-free DEHP-free DEHP-free ● needleless y-shaped VOGT MEDICAL 32 VM® Infusion Sets PVC free Catalog No. Spike Drip Flow regulator Taper chamber Size Type Size roller clamp drum - double scale drum drum - double scale roller clamp roller clamp roller clamp M Tubing Injection Injection Type Packaging needle site cm ● ● ● ● ● polybag Quantity sec. package/ carton 50/500 20/240 25/300 20/240 50/300 50/300 50/300 1311113 1311126 1311152 1311158 plastic ABS S plastic ABS M combined M metal plastic ABS M Luer Slip 150 Luer Lock 150 Luer Lock 150 Luer Lock 150 y-site *** blister blister 1311350* plastic ABS M 1311351** plastic ABS M 1311352 plastic ABS M * with additional 0,2µm fluid filter ** light proof *** needleless L L L Luer Lock 150 Luer Lock 150 Luer Lock 150 ● ● blister y-site blister blister 33 VOGT MEDICAL VM® Infusion Sets DEHP free Catalog No. Spike Drip Flow chamber regulator Size 1311101 1311103 1311103B 1311110 1311111 1311154 1311370**** 1311370A plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS plastic ABS S M M M M M M M Type roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp roller clamp Size M L L L L L L L Luer Slip Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Luer Lock Tube Taper holder Tubing Injection Injection Type Packaneedle site ging cm 150 150 150 150 150 150 200 180 ● ● ● ● ● ● ● ● ● polybag blister blister blister y-site blister blister *** blister *** blister 50/500 50/500 50/500 50/300 50/300 50/300 50/300 50/300 Quantity sec.package/ carton ● ● ● ● ● ● ****with hydrophobic filter VOGT MEDICAL 34  
170124_EN_Datenblatt_Large_volume_syringes.pdf  
TECHNICAL DATASHEET › Injection management VM® LARGE-VOLUME SYRINGES Intended Use: These syringes are interdisciplinary and applicable for various indications: to aspire the contents of the bile/bladder, enteral feeding through the probe, rinsing cavities, use with syringe pumps (perfusion syringes, transparent or amber) etc. Key Benefits › The transparent barrel ensures the controlled administration of the medication › Clearly legible graduation for safe, reliable dosage › Latex-free plunger seal reduces the risk of allergic reactions › Secure plunger stop prevents loss of medication › Broad range of needle fittings (Luer Slip, Luer Lock and Catheter Tip) provides a range of choices, depending on the indication › The possibility of securely connecting a needle or an extension line to a syringe › The eccentric Luer Slip allows injection or aspiration at a small angle, which reduces the dead space › The Catheter Tip allows the use of different types of probes and drains › The Luer adapter at the 100-120 ml syringe allows attaching a needle with a Luer connection › An opaque syringe with a volume of 50 ml provides reliable protection of light-sensitive drugs from light › Syringes with Luer Lock connection are convenient for atraumatic infusion pumps › Syringes components do not contain PVC or natural rubber latex EN TECHNICAL DATASHEET VM® LARGE-VOLUME SYRINGES WITHOUT INJECTION NEEDLE PRODUCT MATERIALS Components 1 2 3 4 5 6 Barrel Plunger Plunger seal Lubricant Luer Slip Luer Lock Catheter tip Raw Materials PP PP Isoprene Silicone oil PP PP PP QUALITY AND SAFETY Norms ISO 7886-1:2015 ISO 7864:2015 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification I STORAGE Temperature Humidity between +10°C and +30°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: 25 syringes Quantity per carton: 100/400 syringes TD Sheet: Rev. 1 created on: March 21st 2018 by: Nataliya Myuller approved on: March 21st 2018 by: Liudmyla Honchar TECHNICAL DATASHEET VM® LARGE-VOLUME SYRINGES WITH INJECTION NEEDLE PRODUCT MATERIALS Components 1 2 3 4 5 6 7 Barrel Plunger Plunger seal Luer Slip Luer Lock Catheter tip Injection needle Needle Lubricant Needle/hub bonding Raw Materials PP PP Isoprene PP PP PP Stainless steel Silicone oil Epoxy resin QUALITY AND SAFETY Norms ISO 7886-1:2015 ISO 7864:2015 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification IIa STORAGE Temperature Humidity between +10°C and +30°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: 25 syringes Quantity per carton: 100/400 syringes TD Sheet: Rev. 1 created on: March 21st 2018 by: Nataliya Myuller approved on: March 21st 2018 by: Liudmyla Honchar TECHNICAL DATASHEET VM® SYRINGES FOR PERFUSION PUMPS WITH OR WITHOUT INJECTION NEEDLE PRODUCT MATERIALS Components 1 2 3 4 Barrel Plunger Plunger seal Luer Lock Raw Materials PP PP Isoprene PP 5 Injection needle Needle Lubricant Needle/hub bonding Stainless steel Silicone oil Epoxy resin QUALITY AND SAFETY Norms ISO 7886-1:2015 ISO 7864:2015 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification I/IIa STORAGE Temperature Humidity between +10°C and +30°C less than 80% PACKAGING Unitary Carton Blister Quantity per box: 25/50 syringes Quantity per carton: 200/400 syringes TD Sheet: Rev. 1 created on: March 21st 2018 by: Nataliya Myuller approved on: March 21st 2018 by: Liudmyla Honchar TECHNICAL DATASHEET TYPES WITH SIZES VM® LARGE-VOLUME SYRINGES Art. No. Volume ml 1310252 1310258 1310264 1310273 1310274 1310282 1310283 1310284 1310285 1310347 *1310348 *1310414 *1310415 1310419 1310133 1310132 1310420 1310421 1310130 50 (60) 50 (60) 30 50 (60) 50 (60) 50 (60) 50 (60) 50 (60) 100 50 (60) 100 100 120 50 (60,0) 50 (60,0) 50 50 (60,0) 50 (60,0) 50 Luer Slip Luer Lock Luer Lock Luer Slip Luer Slip Luer Lock Luer Lock Catheter Tip Catheter Tip Catheter Tip Catheter Tip Catheter Tip Catheter Tip Luer Slip Luer Lock catheter Tip Luer Slip Luer Lock Catheter Tip eccentric concentric concentric eccentric eccentric concentric concentric concentric concentric concentric concentric concentric concentric concentric concentric catheter Tip eccentric eccentric concentric Taper Type Scale graduation ml 1 1 1 1 1 1 1 1 2 1 2 2 2 1 1 1 1 1 1 Injection needle without without Without side side side side side side without without without without without without without side side side 21G 18G 21G 18G 18G 18G 1½ 1½ 1½ 1½ 1½ 1½ 0,8 1,2 0,8 1,2 1,2 1,2 40 40 40 40 40 40 dark-green pink dark-green pink pink pink Gauge Length in Outer diameter mm Length mm 25/400 25/400 40/640 25/400 25/400 25/400 25/400 25/400 25/100 25/400 25/100 25/100 25/100 25/400 25/100 25/100 25/100 25/400 25/400 Colour code Quantity box/carton 18G 18G 18G 1½ 1½ 1½ 1,2 1,2 1,2 40 40 40 pink pink pink *with Luer adapter TD Sheet: Rev. 1 created on: March 21st 2018 by: Nataliya Myuller approved on: March 21st 2018 by: Liudmyla Honchar TECHNICAL DATASHEET VM® SYRINGES FOR PERFUSION PUMPS Art. No. Volume ml *1310505 **1310506 *1310507 **1310508 50 50 50 50 Luer Luer Luer Luer Lock Lock Lock Lock concentric concentric concentric concentric Taper Type Scale graduation ml 1 1 1 1 Injection needle without without side side Gauge Length in Outer diameter mm Length mm 50/400 50/400 25/200 25/200 Colour code Quantity box/carton 16G 16G 1½ 1½ 1,6 1,6 40 40 white white *Syringes for perfusion pump (barrel – clear) **Syringes for perfusion pump (barrel – amber) TD Sheet: Rev. 1 created on: March 21st 2018 by: Nataliya Myuller approved on: March 21st 2018 by: Liudmyla Honchar  
170124_EN_Datenblatt_Insulin_syringes.pdf  
TECHNICAL DATASHEET › Injection management VM® INSULIN SYRINGES Intended Use: Insulin syringes are used for subcutaneous insulin injections. The Vogt Medical insulin syringes are technically well engineered and easy to handle. Broad range of insulin syringes (by insulin concentration, by volume, by needle length, by graduation) provides a range of choices, depending on the indication. The integrated needle or the special shape of plunger seal in the mounted needle version assures maximum performance by minimum dead space. Key Benefits › Transparent syringe barrel ensures controlled administration of medication and the colour code ensures correct selection of syringes › Large, easy to read graduation, for safe, an exact dosage › Depending on the volume of the syringe, the graduation can be 2,0 I.U., 1,0 I.U or 0,5 I.U. › Graduated scale with half units (0,5 I.U.) makes dose adjustment more precise (only for 0,3 ml syringes) › Smooth-glide plunger seal reduces painless injection without jerking › Latex-free plunger seal reduces the risk of allergic reactions › Secure plunger stop prevents loss of medication › The triple bevel of the needle and silicon lubricant on electro-polished needle surface smooths the gliding and reduces the friction › A 6 mm needle in insulin syringes (Insulin U 100 volume sizes; 1,0 ml, 0,5 ml, 0,3 ml) reduces fear of injection, and the risk of needle penetration into the muscle › Protective caps at the ends of the syringe guarantee its sterility › Syringe components do not contain PVC or natural rubber latex EN TECHNICAL DATASHEET VM® INSULIN SYRINGES WITH INTEGRATED NEEDLE PRODUCT MATERIALS Components 1 2 3 4 5 Needle Lubricant Barrel Plunger Plunger seal Lubricant Protective Cap Raw Materials Stainless steel Silicone oil PP PP Isoprene Silicone oil PP QUALITY AND SAFETY Norms ISO 8537:2016 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification IIa STORAGE Temperature Humidity between +10°C and +30°C less than 60% PACKAGING Unitary Carton 1pcs: blister / 10pcs: polybag Quantity per box: 100 pieces Quantity per carton: 3200 pieces TD Sheet: Rev. 1 created on: January 10th 2017 by: Natalie Zavarko TECHNICAL DATASHEET VM® INSULIN SYRINGES WITH MOUNTED NEEDLE PRODUCT MATERIALS Components 1 2 3 4 5 Needle Lubricant Needle hub Needle hub bonding Barrel Plunger Plunger seal Lubricant Raw Materials Stainless steel Silicone oil PP Epoxy resin PP PP Isoprene Silicone oil QUALITY AND SAFETY Norms ISO 8537:2016 STERILIZATION Method Shelf life Ethylene oxide 5 years Classification IIa STORAGE Temperature Humidity between +10°C and +30°C less than 60% PACKAGING Unitary Carton 1pcs: blister / 10pcs: polybag Quantity per box: 100 pieces Quantity per carton: 3200 pieces TD Sheet: Rev. 1 created on: January 10th 2017 by: Natalie Zavarko TECHNICAL DATASHEET TYPES WITH SIZES VM® INSULIN SYRINGES Art. No. Volume ml 1 0,5 0,3 1 1 1 0,5 0,5 1,0 0,5 0,3 1,0 0,5 1,0 0,5 1 1 1 1 1 1 1 0,5 Scale graduation 2.0 I.U. 1.0 I.U. 0.5 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 1.0 I.U. 1.0 I.U. 2.0 I.U. 1.0 I.U. 0.5 I.U. 2.0 I.U. 1.0 I.U. 2.0 I.U. 1.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 1.0 I.U. Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Luer Slip Taper Insulin Injection needle integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated integrated mounted mounted mounted without mounted mounted fixed Gauge Length in U-100 U-100 U-100 U-40 U-100 U-100 U-100 U-100 U-100 U-100 U-100 U-100 U-100 U-100 U-100 U-40 U-100 U-100 U-100 U-100 U-40 U-40 U-40 31G 31G 31G 29G 29G 30G 29G 30G 30G 30G 30G 30G 30G 29G 29G 29G 29G 27G 25G 29G 27G 29G 15/ 15/ 15/ 1 64 64 64 Outer diameter mm 0,25 0,25 0,25 0,33 0,33 0,30 0,33 0,30 0,3 0,3 0,3 0,3 0,3 0,33 0,33 0,33 0,33 0,4 0,5 0,33 0,4 0,33 Length mm 6 6 6 13 13 13 13 13 8 8 8 13 13 13 13 13 13 13 16 13 13 13 Colour code Needle Hub/Cap orange orange orange orange orange orange orange orange orange orange orange orange orange orange orange red yellow grey orange yellow grey yellow Packaging Quantity box/carton 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 1310361 1310362 1310363 1310190 1310193 1310192 1310196 1310195 1310198 1310197 1310360 1310306 1310304 1310305 1310303 1310302 1310355 1310356 1310357 1310358 1310135 1310301 1310364 blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister blister /2 2 2 2 2 16 16 16 2 2 2 2 2 2 2 8 1/ 1/ 1/ 1/ 5/ 5/ 5/ 1/ 1/ 1/ 1/ 1/ 1/ 1/ 5/ 1/ 1/ 1/ 2 2 2 TD Sheet: Rev. 1 created on: January 10th 2017 by: Natalie Zavarko TECHNICAL DATASHEET VM® INSULIN SYRINGES – 10-psc pack Art. No. Volume ml 1 1 0,5 0,3 1 1 1 1 Scale graduation 2.0 I.U. 2.0 I.U. 1.0 I.U. 0,5 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. 2.0 I.U. Luer Slip Luer Slip Taper Insulin Injection needle integrated integrated integrated integrated integrated integrated mounted mounted Gauge Length in U-100 U-100 U-100 U-100 U-100 U-40 U-100 U-40 30G 30G 30G 30G 29G 29G 29G 27G ½ 5/ 16 Outer diameter mm 0,3 0,3 0,3 0,3 0,33 0,33 0,33 0,4 Length mm 13 8 8 8 13 13 13 13 Colour code Needle Hub/Cap orange orange orange orange orange red yellow grey Packaging Quantity box/carton 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 100/3200 1310604 1310607 1310606 1310605 1310603 1310602 1310601 1310600 10psc/polybag 10psc/polybag 10psc/polybag 10psc/polybag 10psc/polybag 10psc/polybag 10psc/polybag 10psc/polybag ½ ½ ½ ½ ½ ½ TD Sheet: Rev. 1 created on: January 10th 2017 by: Natalie Zavarko  
Home  
Spritzen Infusion Blood Managament Regional Anaesthesia Airway Managament Urology Gynecology Ostomy Protective Surgical Spritzen Infusion Blood Managament Regional Anaesthesia Airway Managament Urology Gynecology Ostomy Protective Surgical [Translate to Englisch:] ttt [Translate to Englisch:] tttt German quality since 1991. Medical disposable products. Quality creates trust. Our high qualities, globally employable and innovative disposable medical products as well as our long-standing experience permit targeted client orientation and continued expansion of the product range. Thanks to our global network of distributors, we are able to meet your requirements promptly and effectively. International. Competent. Efficient. Film  
German Quality Medical Disposables  
Spritzen Infusion Blood Managament Regional Anaesthesia Airway Managament Urology Gynecology Ostomy Protective Surgical Spritzen Infusion Blood Managament Regional Anaesthesia Airway Managament Urology Gynecology Ostomy Protective Surgical [Translate to Englisch:] ttt [Translate to Englisch:] tttt German quality since 1991. Medical disposable products. Quality creates trust. Our high qualities, globally employable and innovative disposable medical products as well as our long-standing experience permit targeted client orientation and continued expansion of the product range. Thanks to our global network of distributors, we are able to meet your requirements promptly and effectively. International. Competent. Efficient. Film  
Contacts  
Contact us Vogt Medical Vertrieb GmbH Rüppurrer Str. 1 A, Haus B 76137 Karlsruhe, Germany Fon.: +49-(0)721-98235-0 Fax.: +49 721 98235-20 www.vogt-medical.com Representative offices Vogt Medical, Russia Ul. Odesskaya Building 2, 7th floor, 117638 Moscow, Russia Tel.: +7 (495) 921 15 81 Fax.: +7 (495) 921 15 81 E-Mail:  vm.russia@vogt-medical.com www.vogt-medical.ru Vogt Medical, Belarus Kozyrevskaja Str. 15, 220028 Minsk, Belarus Tel.: +375-17-297-36-75 Fax: +375-17-291-40-20 E-Mail:  vm.belarus@vogt-medical.com Vogt Medical, Ukraine Kupjanskaja Str. 38, 03069 Kyiv, Ukraine Tel.: +38-044-594-81-45 (-46, -47, 48) Fax: +38-044-594-81-49 E-Mail:  vm.ukraine@vogt-medical.com Vogt Medical, Moldova Calea Ieshilor st. 15, MD 2069 Chishinau, Moldova Tel.: +373-22-59-50-05; +373-22-59-50-01 Fax: +373-22-59-50-10 E-Mail:  vm.moldova@vogt-medical.com Vogt Medical, Kazakhstan Zhibek-Zholi Str. 76, f. 503 050004 Almaty, Kazakhstan Tel.: +7-7272-73-25-85 Fax: +7-7272-73-10-53 E-Mail:  vm.kazakhstan@vogt-medical.com